New-Aire Fireplaces burn either Wood or Coal and are designed to centrally heat a house -- or, in lieu of Central Forced Air Heating, the fireplace can function as a Circulating Room/Area Heater.

The New-Aire Fireplace System utilizes refined principles of thermodynamics which are designed to provide the efficiency of any current generation High Efficiency Forced Air Furnace [Radiant, Conductive or Convective Heat Transfer].

By forcing air movement through a series of baffles in a specially designed Heat Exchanger that surrounds a Heavy-Duty Steel Firebox – and with welded-on airtight New-Aire Fireplace Doors and Outside Combustion Air ducted into the firebox -- the New-Aire Fireplace easily matches the heat output of any High Efficiency Furnace on the market today.

In the Fully-Fired Mode, with 1050 cubic feet of air circulation per minute at Central HVAC Static Pressures, the New-Aire Fireplace System produces in excess of 200,000 BTU. 

New-Aire Fireplaces are available in 3 basic designs:

The Dimensions & Weight of Standard New-Aire Fireplaces are as follows:

                                                        Model 42          Model 44         Model 48

1. “A” Firebox Opening                           33”                   38”                   42”

2. “B” Width of Unit                                38”                   42.5”                46.5”

3. “C” Width of Unit with Motors            70”                   75”                   80”

4. “D” Height of Unit                               48”                   48”                   48”

5. Width of Concrete Base                       84”                   88”                   92”

6. Weight of Unit                                      525 lbs             625 lbs             725 lbs

Click-Here for a schematic and motion depiction of how the New Aire Fireplace provides Central Heating

New-Aire Standard Fireplace Features

1. Corner Unit [Standard Models 42, 44 & 48]

2. See-Through Construction – Allows viewing from 2 rooms and outside loading with Insulated Security doors.

3. Heavy Back Construction.

4. Air-Lator [Outside Combustion Air Damper Assembly].  Increases fireplace efficiency.  Negates Negative Pressure Back-Drafting.  Minimizes creosote buildup.

5. Outside Air Hood for Air-Lator Duct.

6. Rotary Control Damper.

7. Remote Blower Mounting Kit

8. Door Assembly welded air-tight to firebox.

9. Door Frame in Metallic Brown, Metallic Blue or Charcoal.

10. Door Frame & Grilles in Metallic Brown, Metallic Blue or Charcoal.

11. Gas Log Lighter & Gas Log Lighter Valve.

12. Outside Wall Ash Clean-Out Door [8” x 8” or 12” x 12”] 

13. Angle Iron Kit.

14. Chimney Hood.

15. BBQ Grill

16. Bean Pot Holder

Notes:

1.  Concrete Pad dimensions are based on 4” brick installation.  If any wider material is used, extend your Concrete Pad accordingly.  Depth of the Concrete Pad is determined by the weight of the unit, mass of the chimney and local building code.

2.  If the Blowers are installed in a remote location instead of on the sides of the unit, the width of the Concrete Pad can be reduced accordingly.

For remote blowers, an adapter from rectangle to 6” round is welded on the side of the firebox during manufacture, with a transition adapter provided for use at the far end in going from round back to rectangular where the blower is attached.  There is an additional charge for this modification.  The duct piping does not come with the fireplace, but must be provided by the Buyer.  Rigid Duct Piping is more efficient and quieter than Flexible Ducting which may also be used.

The Air-Lator Outside Combustion Air Damper [option] is installed in lieu of bricks in the brick facing in front of the fireplace.  The damper sits just behind the fireplace door in front of the fireplace opening.  

Note:  In an installation without Fireplace Doors to conceal the Air-Lator, the aesthetics of the damper may be deemed unsightly.  Without Fireplace Doors for concealment, the Air-Lator Damper can be recessed and covered with a grille of your choice for better appearance.

INSTALLATION PLANNING

The first planning requirement is the size of the concrete pad base, with the above dimensions based on 4 inch brick installation on all 4 sides of the fireplace.  The width of the concrete pad from front to back must allow 4-8 inches of brick, cement block or other masonry enclosure [depending on State/Local Code], with the sides and back of the firebox wrapped in 1/2 inch insulation -- plus 1/2 inch of dead air space.  Blanket type insulation is provided with the unit.

NEVER install brick, cement blocks or other masonry tightly against the firebox.  A MINIMUM of 1 inch [1/2" insulation + 1/2" dead air space] is required for expansion.  If the back or sides of the firebox are installed against a wall or other combustible surface, an extra 2 inches of dead air space clearance must be provided in addition to the above requirements of masonry surround and expansion air space.

The Rotary Control Damper is an option -- not standard.  The unit comes with a 3 position manual damper.  With welded-on air-tight fireplace doors that allows the manual damper to be set at the desired opening and the combustion burn-rate controlled by the Outside Air Combustion Damper for best efficiency, the Rotary Control Damper is not needed -- and without proper maintenance and cleaning, the Rotary Control Damper can become gummed-up with creosote build-up which impedes its operation.

New-Aire Fireplaces are All-Fuel Rated and can burn either wood or coal.  To burn coal, a Heavy Duty Firebox is required as an option at additional cost.  New-Aire does not provide the Cast Iron or Stainless Steel Coal Grate/Basket that is needed to burn coal.  

Unlike stoves and inserts, the New-Aire Fireplace can be ducted to provide Whole House Central Heating.  New-Aire Fireplaces are certified to the International Mechanical Code -- and,  when connected to induce heat into Central Heating Ductwork, efficiently heats homes of 5000 square feet.

---

                                               New-Aire Air Tight Fireplace Doors

 

Your home is the Heart of Your Family Life.  A warm hearth is the gathering place that defines the Spirit of A Home. 

The New-Aire Fireplace -- clad in Brass and Glass – provides both the traditional and functional elements desired in today’s lifestyle.

The Door Series [100, 200, 300, 400, 500, 600] refers to the size of the doors and shape of the glass.  The frame of the doors is the same size for all series -- only the size of the doors & class differ.  The cost is the same for each style/series of door.  For colors other than Standard Black, there is an additional cost for Metallic Brown, Metallic Blue or Charcoal.

New-Aire Air Tight Fireplace Doors turns any fireplace into a More Efficient Furnace by controlling the “Burn Rate” to use up to 2/3 less wood.   

Series 100 Fireplace Doors	Series 200 Fireplace Doors
Door Opening:  16” x 27.25”	Door Opening:  18.5 “ x 32”
Series 300 Fireplace Doors	Series 400 Fireplace Doors
Door Opening:  18” x 27.25”	Door Opening:  18” x 27.25”
Series 500 Fireplace Doors	Series 600 Fireplace Doors
Door Opening:  18.5 “ x 32”	Door Opening:  18.5 “ x 32”